|
|
Getters for CRT
Intro
This series are evaporable Ba-Al-Ni
getters containing doped nitrogen,
and suitable for monochrome CRT
and monitor tube.
Click HERE
to order
|
|
|
Getters for LIGHTING
Intro
Pressing varies alloy powder in
metal plate makes the non-evaporable
getters. There are 101, 198, 299 and
206 four kinds of powder to meet
your choice.
Click HERE
to order
|
|
|
Gtters for LIGHTING
Intro
They are evaporable Ba-Al-Ni
getters, and is suitable for
high/low pressure sodium lamps,
dysprosium lamps, power emitting
tube, image tube, and other vacuum
device.
Click HERE
to order
|
|
|
|
|
|
For Solar Collector Tubes
Intro
They are evaporable Ba-Al-Ni
getters. The powder has steady
performance, consistent Ba yield and
small outgassing. This series is
used in solar collector tubes
widely.
Click HERE
to order
|
|
|
Getters for VFD
Intro
VFD getters are fine pressed
evaporable Ba-Al-Ni ones. The alloy
powder is made by advanced technique
with steady performance, consistent
Ba yield and small outgassing.
Click HERE
to order
|
|
|
Getters for SS FLASK
Intro
Zr-V-Fe is another kind of
non-evaporable getters. Designed
for stainless steel vacuum flask,
infrared Dewar, high-tension
switch tubes, electric lighting
products and so on.
Click HERE
to order
|
|
|
|
|
|
|
|
Getters for CCRT
Intro
It's made from BaAl4, and the Nickel
powder (sometimes plus Iron
Nitride). Good at improving and
maintaining the vacuum degree inside
the CCRT and CPT. [BaAl4
ingot]
Click HERE
to order
|
|
|
Getter Mercury Dispenser
Intro
The GMD can not only release the Mercury needed but also absorb active gaseous impurities. There's
no pollution caused by the traditional Mercury-filling methods.
It's widely used in CCFL.[STRIP]
[TUBE]
Click HERE
to order |
|
|
Cold Cathode
for CCFL
Intro
It's designed for CCFL (Cold Cathode Fluorescent Lamp),
high welding strengthen, perfect air sealed glass
bead. For different sealing glass, we have Kovar ,Ni-Mn wire and dumet series to meet your choice.
Click HERE
to order
|
|
|
|
