INTRODUCTION：
Pressing TK101 and TK505 alloy powder onto strip makes the Getter Mcry Dispenser (GMD). The getter can not only release the Mcry needed but also absorb active gaseous impurities. The applying of GMD strip does not have the pollution caused by the traditional Mcry-filling methods. They are used for electrical lightings and vacuum devices, The GMD can be activated by means of high-frequency induction, electrical heating, radiation heating or laser heating.
DIMENSION：
| 货号 Code | 型号 Type | 压粉面 Coated | A (mm) | B (mm) | L (mm) | T (mm) | M (mm) | N (mm) | Hg amount | 型号对照 Comparison type | | ACP120 | TK606/J1/6.3 | 1 | 6.3 | 4 | ∞ | 0.15 | - | - | 1.6 mg/cm | - | | ACP121 | TK606D/J1/6.3 Q60 | 1 | 6.3 | 4 | 61 | 0.15 | 9.5 | 23 | 7 mg/pcs | HZ24D100X | | ACP135 | TK505/J2/6.3 | 2 | 6.3 | 4 | ∞ | 0.15 | - | - | 6 mg/cm | H6J8Q | | ACP151 | TK101-505/J2/6.3 | 1+1 | 6.3 | 4 | ∞ | 0.15 | - | - | 3 mg/cm | HZ6J8Q | | ACP136 | TK606/J2/8 | 2 | 8 | 6 | ∞ | 0.20 | - | - | 8 mg/cm | H8J60Q | | ACP138 | TK606/J2/8 L1.1 | 2 | 8 | 6 | 1.1 | 0.20 | - | - | | - | | ACP139 | TK606/J2/8 L1.9 | 2 | 8 | 6 | 1.9 | 0.20 | - | - | | - | | ACP071 | TK101/J2/8 | 2 | 8 | 6 | ∞ | 0.20 | - | - | N/A | Z8J60Q | | ACP065 | TK101/J2/8 L13D | 2 | 8 | 6 | 13 | 0.20 | - | - | N/A | - | | ACP123 | TK101/J2/8 L68 | 2 | 8 | 6 | 68 | 0.20 | - | - | N/A | - | | ACP145 | TK101/J1/6.3 | 1 | 6.3 | 4 | ∞ | 0.15 | - | - | N/A | - | | ACP171 | TK707/J2/8 | 2 | 8 | 8 | ∞ | 0.20 | - | - | N/A | - | |
RECOMMENDED ACTIVE CONDITION：
| | 300℃ | 350℃ | 400℃ | 450℃ | 500℃ | 750℃ | 800℃ | 850℃ | 900℃ | 1150- 1200℃ | 起始压强 Start Pressure | | TK101 | - | - | - | - | - | 25~30 min | 5 min | - | 30 sec. | 3 sec. | ≤ 1 Pa | | TK707 | 5 hr | 1 hr | 30 min | 10 min | 5 min | - | - | - | - | - | ≤ 1 Pa | | TK606 | - | - | - | - | - | - | - | 30 sec. | - | - | N/A | |
Home Previous 8 9 10 11 12 Next End10/25Page All 25 Results
